Important; Introduction - Elite Super Crono Hydromag Digital Mode D'emploi

GB
Thank you for choosing the Super Crono Hydromag Digital.

IMPORTANT

Do not stop the rotation of the
bicycle wheel by using caliper or
disk brake. This seriously dama-
ges the roller and the tire.

INTRODUCTION

Check the presence of all the following components.
1 Hydromag Unit (Ref. A)
1 stand (Ref.B)
- 1 left bushing pin (Ref.C)
- 1 ring (Ref.D)
- 1 right bushing pin (Ref.E)
- 1 control lever (Ref.F)
- 1 unit support upper base (Ref.G)
- 1 unit support lower base (Ref.H)
- 1 screw M6 x45 mm (Ref.I)
- 1 washer Ø6 mm (Ref.L)
- 1 nut M6 (Ref.M)
1 bag of unit accessories:
- 1 hex wrench
- 2 screws M6 x 55 mm (Ref.N)
- 2 washers Ø6 mm (Ref.O)
1 Quick release (Ref.P)
1 console (Rif.Q)
8
1 Supercrono HydroMag Dgt.indd 8
ENGLISH
05/11/09 12:21