Broan-NuTone CLDA1 Serie Manuel D'installation, D'utilisation Et D'entretien page 20

LED Light Bulbs (CLSC2 Series only)
The CLSC2 Series range hoods require two LED light bulbs (120 V, 4 W max ., with GU10 base),
included .
1 ] Align the bulb leads with the small indentations located on the border of the lamp location on
2 ] Gently push upwards and turn clockwise until secure .
NOTE: The Suction Cup Tool (included with hood) can be used to install and remove light bulbs .
Install the Filters
Ducted Installation Only:
Re-install grease filters removed in step 2 , page 9, under "Prepare the Hood" .
Non-ducted Installation Only:
Purchase two non-ducted filters from your local distributor or retailer (see product specification
label for filter type) . Attach the non-ducted filters following instructions packed with the
non-ducted filter .
20
BULB LEADS
HR0110
hood (see inset above), then install the bulbs by placing the bulb leads into their grooves in
the socket .
Press suction cup tool on bulb and rotate counterclockwise to remove bulb or clockwise to
install bulb .
BULB LEAD
GROOVES
(IN SOCKET)
SUCTION
CUP TOOL