inventiv INV E2046 T Notice Originale D'utilisation page 54

4. Connection to the power supply
- Connect the extension cord to the extension cord
- About 30 cm from the end, hookthe extension cord through the cord strain
- Connect the plug to the power supply
WARNING!
and current must comply with the information on the rating label!
Always use a power supply protected by a residual-current-operated
protective device RCD). If using an extension cord ensure it is of the
proper size and type for your product (≥1.5mm2)! Use an extension
cord specifically designed for outdoor use!
Check the voltage and current! The voltage
54