Caso Germany VC10 silber Manuel D'instructions page 49

15 Design and Function
15.1 Complete overview
15.2 Rating plate
caso Vakuumierer VC10
This chapter provides you with important safety notices on the
design and function of the device.
A Seal only For sealing the bag without
B Indicator lamp (for seal) For indicate the
C Cancel (Stop) For switch off the vacuuming
D Indicator lamp (for vacuum) For indicate
E Vacuum/Seal For draw air out of the bag
F Cover-lock To lock the cover. On the left
G Cover-unlock Press to unlock the cover.
If you open the cover, you see the
Sealing strip: Contains a heating wire covered with Teflon
which allows the bag to seal but not to stick to the strip.
Warning
Please observe the following safety notices in order not to burn
or scald yourself or others.
► To avoid getting burned, never touch the sealing bar while
the unit is operating.
The rating plate with the connection and performance data can
be founded on the back of the device.
vacuum.
seal process.
and sealing action whenever the operator
wants to stop the operation.
the vacuum process.
and automatically change operation to seal
the bag after vacuum is completed.
side and right side of the cover there is a
key-press.
49