Miller PipePro 12RC SuitCase Manuel Du Propriétaire page 17

4-1. Important Information Regarding CE Products (Sold Within The EU)
A. Information On Electromagnetic Fields (EMF)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner's Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
4-2. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the inside of the back panel. Use rating label to determine input power require-
ments and/or rated output. For future reference, write serial number in space provided on back cover of this manual.
4-3. Specifications
Welding
Type of
Power
Input
Source
Power
Type
PipePro
450RFC
40 Volts DC With 14-Pin
10 Amperes And
Contactor
Control
4-4. Environmental Specifications
SECTION 4 − INSTALLATION
Wire Feed Wire
Speed Diameter
Range Range
50 to 700 ipm
.023 To 5/64 in.
(1.3 To 17.8
(0.6 To 2 mm)
mpm)
This equipment is designed for outdoor use. It may be stored,
but is not intended to be used outside during precipitation unless sheltered.
Max. Wire
Input Welding
Circuit Rating
100 Volts,
450 Amperes, 60%
Duty Cycle
IP Rating
IP23
ce-emf 1 2010-10
ce-emc 3 2011-09
Overall
Spool
Dimensions
Capacity
Length: 20 in.
(508 mm)
30 lb
Width: 8 in.
(13.6 kg),
12 in. (203 mm)
(304 mm)
Height: 15-1/2 in.
(394 mm)
OM-221 687 Page 13
Weight
25.5 lb
(11.6 kg)