Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Battery removal (RF models only)
1) Remove the switch cover panel by hands or by using a screwdriver.
2) Remove the battery cover by means of a flathead screwdriver.
3) Remove the plastic protection and replace the old battery with the new one.
4) Reinstall the battery cover.
5) Reinstall the switch cover panel.
25
Troubleshooting
Problem
In case of
installation with an
optional brackets
kit the appliance
vibrates during
operation
32
1
3
Possible cause
The anti-vibration mounts
have not been installed
or have been installed
without following
the instructions provided with
the accessory.
2
4
5
Check that the installation
of anti-vibration mounts
has been done correctly.
Corrective action
Publicité
