Vortice VORT PIV QUADRO Notice D'emploi Et D'entretien page 28

ENGLISH
SET WINTER TEMP
The winter temp(erature) setting is the ambient temperature of the air within the loft space that will switch the post
heater ON and OFF . When the loft air temperature falls to or below the set point the post heater switches ON.
When the air temperature in the loft climbs above the set point the post heater switches OFF. The selectable
temperature range is from 5°C to 15°C with 10°C being the factory default setting.
IMPORTANT: The post heater needs to be installed, the SET HEATER MODE above must be enabled by setting
to 'YES' and the heater must be set to AUTO mode (refer to "HEATER" section under 'Edit parameters').
SET WINTER TEMP.
ESC
WINTER TEMP.
10 °C
15° C
14° C
13° C
12° C
11° C
10° C
9° C
8° C
7° C
6° C
5° C
SET SUMMER TEMP
The summer temp(erature) setting is the ambient temperature of the air within the loft space which will when rea-
ched or exceeded, the PIV unit will go to standby mode until the air temperature within the loft falls below this point.
The selectable temperature range is 24°C to 28°C with 26°C being the factory default.
n
SET SUMMER TEMP.
ESC
SUMMER TEMP.
26 °C
28° C
27° C
26° C
25° C
24° C
28
Service menu
Use the  &  keys to scroll the
functions list, press the 
OK
access function
WINTER TEMP).
Use the  &  keys to scroll through
temperature range 5°C to 15°C , press
the 
key to confirm selection. And
return to service menu screen.
Press the Key twice (4) to return to
main screen.
10°C is the factory default setting.
Service menu
Use the  &  keys to scroll the
functions list, press the  key to access
OK
function required (SET SUMMER TEMP).
Use the  &  keys to scroll through
temperature range 24°C to 28°C , press
the 
key
return to service menu screen. Press the
Key twice (4) to return to main screen.
26°c is the factory default setting.
key to
required (SET
to confirm selection and
SET WINTER TEMP.
ESC OK
n
SET SUMMER TEMP.
ESC OK