ENGLISH
SET HEATER MODE
When the electric heater is installed the SET HEATER MODE function requires setting to YES to enable the heater
function.
SET HEATER MODE
ESC
SET HEATER MODE
YES
NO
SET HEATER MODE
YES
NO
HEATER TEST
The SET HEATER TEST function checks and tests the heater operation. The heater will run for 10 seconds and
will then return to the set function parameter (Refer to "HEATER" section under "Edit parameters").
n
HEATER TEST
ESC
n
HEATER TEST
HEATER ON 10sec
10sec
26
Service menu
Use the & keys to scroll the
functions list, press the key to access
OK
function required (SET HEATER MODE).
Use the &
'NO' is the default setting.
Press the
return to service menu screen. Press the
Key twice (4) to return to main screen.
Use the & keys to scroll the functions
list, press the key to access function
OK
required
(SET HEATER TEST).
01sec
keys to select YES or NO.
key to confirm selection and