Telestar imperial DABMAN i450CD Manuel D'instructions page 157

7. SETTINGS
Select a location for which you want to display the weather fore-
cast and weather information.
Temperature unit
Specify which temperature unit is to be used.
You can choose between Celsius (
Standby display
Specify here whether the radio should display weather data
in standby or not.
Change the settings as follows:
Use the buttons ▼▲ on the remote control to select the weather
menu item in the settings menu and press the ENTER key on the
remote or the ENTER button on the device.
Confirm your entry with ENTER on the remote control or by
pressing the ENTER button
on the unit.
7.1.14. FM settings
In this menu item you can select between Stereo and Mono for
FM radio reception.
This setting can be useful when you are receiving an FM station,
but the signal is weak and full of interference. In such a case,
change the reception to mono to improve the quality.
If you select Stereo, the received radio signal is output in stereo
quality. If a poor reception leads to signal interference, the radio
can automatically switch to mono reception mode.
This threshold value, as of which the radio switches to mono
mode, can be set in the Sensitivity option.
C) and Fahrenheit (
0
157
F).
0
DABMAN i450CD
E