Telestar imperial DABMAN i450CD Manuel D'instructions page 164

7. SETTINGS
In line B, change the low-frequency range according to your
preferences.
In line L you can activate or deactivate the Loudness function.
Confirm your settings by pressing ENTER on the
E
remote control or pressing the ENTER button on the device.
7.1.21. Resume playback after switching on
In this menu item you can determine whether the playback of a
music file via a connected USB data carrier should be continued
automatically after switching on.
Use the ▼▲ buttons of the remote control in the setting menu to
select Continue playback after switching on and
press the ENTER button on the remote control or
the ENTER button on the device.
Switch the function on or off.
7.1.22. Software update
To improve the functions of the device, it may be necessary to
update the operating software.The USB interface allows you to
update your radio's operating software, which can be downloa-
ded from www.telestar.de if necessary. The software provided on
the website must be unpacked. The unpacked file is then trans-
ferred to an appropriate storage medium and connected to the
radio via the USB port. A description of the exact procedure can
be found in the download file.
Operating Manual 164