Publicité
Les langues disponibles
Les langues disponibles
6. INSTALLATION
6.1 General operating instructions
>
Switch the unit on or off using the standby
button on the remote control.
E
>
You can increase the volume using the VOL+ button
on the remote control.
>
You can decrease the volume using the VOL+ button
on the remote control.
>
The menu items can be selected the ▼▲ buttons.
Using the ENTER button, you can confirm a
>
selection.
6.2. Preparing the remote control
Remove the battery transport lock on the remote control. To do
this, pull out the plastic tab on the battery case of the remote
control. This establishes the battery contact.
To replace the remote control battery, open the battery compart-
ment on the back of the remote control.
Unscrew the screw with a suitable Phillips screwdriver. Pull the
battery compartment out of the remote control. Remove the bat-
tery and insert a new battery of the same type.
Operating Manual
134
Publicité
