Telestar imperial DABMAN i450CD Manuel D'instructions page 150

7. SETTINGS
Use the ▼▲ buttons on the remote control in the Settings menu
to select the Alarm clock and press the ENTER button on the
remote control or confirm with the ENTER button on the unit.
Select Alarm clock 1 or Alarm clock 2 and confirm by pressing
E
the ENTER button on the device or use the
ENTER button on the remote control.
Activate the alarm clock via the On option.
Deactivate the alarm clock via the Off option.
Once you have activated the alarm, you can set the repeat inter-
vals,
the alarm time and type in the following menu.
Repeat:
Here you can choose daily, once, or one or several
days of the week.
Time:
Set the time at which the alarm clock is to be triggered here. Use
the numeric keypad on the remote control or the ▼▲ buttons on
the device.
Source:
Decide which alarm signal you would like to activate here.
A sound, melody, Internet radio, FM, DAB/DAB+ or USB.
Please note that when selecting FM, DAB/DAB+ or Internet
radio, at least one favourite station must be stored for the re-
spective reception mode. If no favourite is stored in the selected
reception mode, the empty message appears.
To confirm single entries, save these with the ENTER button . To
return to the menu, hit the arrow button◄ .
Please also read chapter 9.8. on saving a favourite station.
Operating Manual 150