StarLab ErgoOne E Mode D'emploi page 31

Removing shafts and pistons for cleaning or replacement
b.
c.
d.
e.
f.
a.
Unscrew pipetting unit: Separate the pipetting unit
from the handle.
b.
Remove the pipetting housing: Pull the sliding
catches of the pipetting housing cover out to the
side as far as they will go and remove the pipetting
housing.
c.
Move the piston to the lower position: Push the
plunger down until the pistons are in the lowest
position.
d.
Remove the shaft attachment: Pull out the shaft
attachment from the side.
e.
Gently push out the piston shaft unit directly at the
pipetting housing.
f.
Remove the piston shaft unit. Only the entire
piston–shaft unit can be replaced.
ErgoOne E Multi-Channel Pipettes · User Manual · 31
®