StarLab ErgoOne E Mode D'emploi page 11

4.3 Set the aspiration and dispensing speed
Aspiration and dispensing speed are separately adjustable. When the menu is called up, the last
speed set in each case is displayed. Five speed levels are available in each case.
Set aspiration speed
Set dispensing speed
a.
1x

+
b.
Press the arrow keys (+\−) to select the speed
level (e.g. level 5).
'Speed' continues to flash.

–
1x
c.
Press 'Enter' key.
The display returns to the basic state of the

respective set mode. Here, for example the
display of the standard PIP mode.
a. Pressing the menu key twice briefly takes you to
the dispensing speed menu.
2x
'Speed' flashes.

+
b. Press the arrow keys (+\−) to select the speed level
(e.g. level 2).
'Speed' continues to flash.

–
1x
c. Press 'Enter' key.
The display returns to the basic state of the
respective set mode. Here, for example the
display of the standard PIP mode.
ErgoOne
Pressing the menu key once briefly takes you to
the aspiration speed menu.
'Speed' flashes.
E Multi-Channel Pipettes · User Manual · 11
®