Footrests, Legrests & Footplates; Z-Finity™ Footrest System; Z-Finity™ Swing-Away Footrest - Quickie Q2 Lite Mode D'emploi

Q UI C KI E 2 L ITE
K. FOOTRESTS, LEGRESTS, & FOOTPLATES
Make sure that your Sunrise dealer has correctly adjusted your footrests and/or legrests with the advice of a
healthcare professional. The original setup should not be changed without first checking with that advisor. The
footrest position is key to keeping your body in the proper alignment, and providing a stable support for your
legs and torso. Legrests and footrests should be swung out of the way, or removed for transfers.
Swing-in Swing-out hangers and footrests
1. Basic Footrest Installation
a. Place swing-in/swing-out pivot saddle into the receiver (A) on the front frame tube with the footrest
fac-ing inward or outward from the frame.
b. Rotate the footrest inward until it locks into place on the locking plate.
2. Removal
a. To remove footrest, release latch (B) by pulling lever upward or pushing lever downward.
b. Rotate the footrest inward or outward and lift it off of the chair.
3. Flipping up the Platform Footplate
Flip-up the Footplate when transferring from your wheelchair.
L. Z-FINITY™ FOOTREST SYSTEM
CAUTION– The Z-Finity™Footrest system is rated to 165lbs (75kg)
With the footrest system, Sunrise Medical offers either a single Flip-up Footplate (B), or dual footplates
(C) that are able to accomodate all of the possible heights and adjustment angles that the rider may
require for their comfort and support.
Z-FINITY™ SWING-AWAY FOOTREST
The footrest system can also accommodate a swing-away hanger(D) with dual footplates (C) that
are both height adjustable and angle adjustable.
Swing-in-Swing-out Hangers and Footrests (80°)
1. Basic Footrest Installation
a. From the side, place the pivot (E) into the top of the frame tube which guides the hanger into the
cor-rect alignment with the locking plate (F) on front frame tube.
b. Rotate the footrest towards the front of the chair until it locks into place on locking plate.
2. Removal
a. To remove footrest, release latch (G) by pulling lever upward or pushing lever downward.
b. Rotate footrest inward or outward and lift.
19
20
21 22
22 23
17
VIII. USE AND MAINTENANCE
D
E
F
MK-100071 Rev. E
19
A
20
21
22
23