Publicité
Les langues disponibles
Les langues disponibles
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
1
Introduction
Dear Customer:
Thank you very much for purchasing our product. We are confident that
it will perform to your fullest satisfaction.
The HWT 160–M butt-welding machine is designed exclusively for welding
pipes and components made of thermoplastic material with one of the
diameters it is prepared for, using the butt-welding process with heating
element.
The HWT 160–M was manufactured according to state-of-the-art tech-
nology and recognized safety regulations and is equipped with the ap-
propriate safety features.
Before shipment, the product was checked for operation reliability and
safety. In case of errors of handling or misuse, however, the following
may be exposed to hazards:
·
the operator's health,
·
the product and other hardware assets of the operator,
·
the efficient work of the product.
All persons involved in the installation, operation, maintenance, and
service of the product have to
·
be properly qualified,
·
operate the product only when observed,
·
read carefully and conform to the User's Manual before working with
the product.
Thank you.
2
Safety Messages
Compliance with the following safety rules is critical for the effective use
of the product and for working without exposing oneself to hazards.
2.1
Working with the Machine
•
Keep the workplace and the equipment itself clean.
•
Use appropriate caution when operating the machine.
•
Operate the machine only when the power supply cords are perfectly
in order (no damage, kinks, twists or knots) and protect the cords
against cutting edges.
•
Always dress appropiately when planning to use the machine: long
trousers, heat-resistance safety gloves and safety shoes.
•
Do not wear scarfs, necklaces, watches, rings or any other object
that could get caught in the machine moving parts.
•
Do not expose the machine to the elements and do not use it in
unfavorable weather conditions (fog, snow, rain, high levels of hu-
midity, etc.).
•
Respect any applicable rules on occupational safety in force at the
place the machine is used, and use common sense to avoid any
hazardous situation.
2.2
Work Environment
•
Do not use the machine, and in particular its heating element, when
flammable liquids or gases, chemical or corrosive agents are in the
vicinity.
•
Make sure that the place were the machine is used and its immedi-
ate surroundings are sufficiently brighty illuminated.
Version August 2010
All manuals and user guides at all-guides.com
HWT 160–M User's Manual
5
EN
Publicité
