Télécharger Imprimer la page

SPARKY BR 9,6E Mode D'emploi page 5

Masquer les pouces Voir aussi pour BR 9,6E:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
parts. This will ensure that the safety of the
power tool is maintained.
IV - Additional safety
rules for cordless
drills / drivers
▪ Be aware that this tool is always in an operat-
ing condition, because it does not have to be
plugged into an electrical outlet. Always set the
trigger switch to the locked OFF position when
installing or removing the battery pack.
▪ If possible, always use clamps or a vice to hold
your work.
▪ Do not touch the bit after operation. It will be
very hot.
▪ When using the drill, use safety equipment in-
cluding safety glasses and ear defenders. Wear
a dust mask if the drilling operation creates
dust.
▪ The dust, separated while processing materi-
als, containing quartz (SiO2) is dangerous to
your health. Do not process materials contain-
ing asbestos.
▪ The tool must be used only for its prescribed
purpose. Any use other than those mentioned
in this Manual will be considered a case of mis-
use. The user and not the manufacturer shall
be liable for any damage or injury resulting from
such cases of misuse.
▪ To use this tool properly, you must observe the
safety regulations, the assembly instructions
and the operating instructions to be found in
this Manual. All persons who use and service
the machine have to be acquainted with this
Manual and must be informed about its poten-
tial hazards. Children and frail people must not
use this tool. Children should be supervised
at all times if they are in the area in which the
tool is being used. It is also imperative that you
observe the accident prevention regulations in
force in your area. The same applies for general
rules of occupational health and safety.
▪ The manufacturer shall not be liable for any
changes made to the tool nor for any damage
resulting from such changes.
Even when the tool is used as prescribed it is not
possible to eliminate all residual risk factors. The
following hazards may arise in connection with the
tool's construction and design:
▪ Damage to the lungs if an effective dust mask is
not worn.
▪ Damage to hearing if effective ear defenders
are not worn
Instruction manual
pages-BR9,6-12E-15E.indd 5
All manuals and user guides at all-guides.com
V - Additional instructions
▪ Before using the charger, read all the instruc-
▪ Only charge your batteries indoors as the
or damaged in any other way, do not insert it
in the charger. There is a danger of electric
shock.
come into contact with the charger. There is a
danger of electric shock.
▪ The charger is not intended for any use other
▪ The charger and battery packs supplied with it
▪ Do not place any object on top of the charger
▪ Do not pull on the lead of the charger to discon-
▪ Make sure that the charger cord is positioned
▪ Do not use an extension cord unless it is abso-
▪ Do not use the charger if it has been subjected
▪ Do not disassemble the charger. Take it to an
for work with the
charger
tions and cautionary markings on the charger
and battery pack as well as the instructions on
using the battery pack.
charger is designed for indoor use only.
CAUtIoN: If the battery pack is cracked
WARNING: Do not allow any liquid to
than charging the exact type of SPARKY re-
chargeable battery pack as supplied with the
charger. Any other use may result in the risk of
fire or electric shock.
are specifically designed to work together. Do
not attempt to charge the battery pack with any
other charger than the one supplied.
as it could cause overheating. Do not place the
charger near any heat source.
nect it from the power source.
where it will not be stepped on, tripped over or
otherwise subjected to damage or stress.
lutely necessary. The use of an improper exten-
sion cord could cause the risk of fire or electric
shock.
to a heavy knock, dropped or otherwise dam-
aged in any way. Do not operate charger with
damaged cord or plug - have them replaced
immediately. Take the charger to an authorised
service centre for a check or repair.
authorised service centre when service or re-
pair is required. Incorrect re-assembly may re-
sult in the risk of fire or electric shock.
5
EN
22.8.2006 г. 14:07:16

Publicité

loading