SPARKY BR 9,6E Mode D'emploi page 10

IX - Maintenance
WARNING: Always switch the tool off
and remove the battery before performing any
adjustments or maintenance procedures.
Regularly check that all the fixing screws are tight.
They may vibrate loose over time.
Re-lubricate all moving parts at regular intervals.
ClEANING
For safe operation always keep the machine and
its ventilation slots clean.
Regularly check to see if any dust or foreign matter
has entered the grills near the motor and around
the switches. Use a soft brush to remove any ac-
cumulated dust. Wear safety glasses to protect
your eyes whilst cleaning.
If the body of the tool needs cleaning, wipe it with a
soft damp cloth. A mild detergent can be used.
CAUtIoN: Never use alcohol, petrol or
other cleaning agent. Never use caustic agents
to clean plastic parts.
CAUtIoN: Water must never come into
contact with the tool.
ImPoRtANt! To assure product safety and reliabil-
ity, repairs, maintenance and adjustment (including
brush inspection and replacement) should be per-
formed by certified service centres or other qualified
service organisations, always using genuine replace-
ment parts.
0
EN
pages-BR9,6-12E-15E.indd 10
All manuals and user guides at all-guides.com
X - Warranty
The guarantee period for SPARKY power tools is
determined in the guarantee card.
Faults due to normal wear, overloading or improp-
er handling will be excluded from the guarantee.
Faults due to defective materials implemented as
well as defects in workmanship will be corrected
free of charge through replacement or repair.
The complaints for defective SPARKY power
tools will be recognized if the machine is sent
back to the dealer or is presented to the author-
ised warranty service centre undismantled, in its
initial condition.
Notes
Carefully read the entire Instruction Manual before
using this product.
The manufacturer reserves the right to change
specifications without notice.
Specifications may differ from country to country.
bR 9,6E • bR 2E • bR 5E
22.8.2006 г. 14:07:17