Publicité
Les langues disponibles
Les langues disponibles
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
▪ When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
PERsoNAl sAfEty
▪ Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medi-
cation. A moment of inattention while operating
power tools may result in serious personal in-
jury.
▪ Use safety equipment. Always wear eye protec-
tion. Safety equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protec-
tion used for appropriate conditions will reduce
personal injuries.
▪ Avoid accidental starting. Ensure the switch is
in the off-position before plugging in. Carrying
power tools with your finger on the switch or
plugging in power tools that have the switch on
invites accidents.
▪ Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
▪ Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of
the power tool in unexpected situations.
▪ Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
▪ If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use
of these devices can reduce dust-related haz-
ards.
PoWER tool UsE AND CARE
▪ Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
▪ Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
▪ Disconnect the plug from the power source be-
fore making any adjustments, changing acces-
sories, or storing power tools. Such preventive
EN
pages-BR9,6-12E-15E.indd 4
All manuals and user guides at all-guides.com
▪ Store idle power tools out of the reach of chil-
▪ Maintain power tools. Check for misalignment
▪ Keep cutting tools sharp and clean. Properly
▪ Use the power tool, accessories and tool bits
CoRDlEss PoWER tool UsE
AND CARE
▪ Ensure the switch is in the off position before in-
▪ Recharge only with the charger specified by the
▪ Use power tools only with specifically desig-
▪ When battery pack is not in use, keep it away
▪ Under abusive conditions, liquid may be ejected
sERvICE
▪ Have your power tool serviced by a qualified
safety measures reduce the risk of starting the
power tool accidentally.
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in
the hands of untrained users.
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed. Use
of the power tool for operations, different from
those intended, could result in a hazardous
situation.
serting battery pack. Inserting the battery pack
into power tools that have the switch on invites
accidents.
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire
when used with another battery pack.
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals to-
gether may cause burns or a fire.
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help. Liq-
uid ejected from the battery may cause irritation
or burns.
repair person using only identical replacement
bR 9,6E • bR 2E • bR 5E
22.8.2006 г. 14:07:16
Publicité
