Rcs : État Enregistrement - Spectra Precision GNSS SP90m Guide Utilisateur

RCS : État enregistrement
$PASHR,RCS,c1,d2,s3,d4,f5,f6,f7,d8,d9)*cc
Parameter
Recording status:
• Y: Data recording in progress; receiver will keep
on recording data after a power cycle.
• N: No data recording in progress; after a power
c1 cycle, no recording will start either.
• S: No data recording in progress, but receiver
will start recording data after a power cycle.
• R: Data recording in progress, but receiver will
stop recording data after a power cycle.
Memory where data file is recorded:
d2
• 0: Internal memory
s3 Data filename
d4 Recording rate, in seconds:
Occupation type:
• 0: Static
f5
• 1: Quasi-static
• 2: Dynamic
Occupation state:
d6 • 0: In progress
• 1: No occupation
s7 Occupation name
*cc Checksum
Description Range
Y, N, S, R
255 char. max.
0.05-960
0-2
0-1
255 char. max.
*00-*FF
147