Correct Purpose Of Use - Häfele DT 710 Instructions De Montage Et De Maintenance

2.2 Correct purpose
of use
16
Safety notes in handling indications
Safety notes may relate to certain individual handling indications. Such safety notes
are incorporated into the handling indication as to not interrupt the flow of reading
when carrying out the action. The signal words described above are used.
Example:
1. Loosen screws.
2. Connect lead.
CAUTION
Risk of leads being trapped by the cover!
> Watch the position of the lead. Close cover carefully.
3. Tighten screws.
Special safety notes
To draw attention to special risks, the following symbols are used in the safety notes:
Warning sign
This symbol highlights useful tips and recommendations and
information for efficient and problem-free operation.
Other markings
The following markings are used in these installation and maintenance instructions
to highlight action instructions, results, lists, references and other elements:
1.>, 2.>, 3.>

•
[push button]

Correct purpose of use

The product is an electronic door fitting for use in hotels, hospitals and other
buildings with frequent changes of room occupant.
The operator must equip the relevant doors with a single profile cylinder for
emergency opening in the event of faults or emergencies.
The product is intended for the following areas of application:
• Use on room doors inside buildings,
• Use on doors that comply with the specified installation requirements.
Correct purpose of use also includes adhering to the manufacturer's operating,
service and maintenance conditions.
Type of risk
Warning of dangerous electrical voltage
Warning of a hazardous area
Step-by-step action instructions
Results of action steps
Lists without a defined order
Controls (e.g. push buttons, switches),
display elements (e.g. signal lamps)