Correct Purpose Of Use - Häfele DT 700 Instructions De Montage Et De Maintenance

2.2 Correct purpose
of use
16
NOTE
The note is used to point out dangerous situations which could lead to po-
tential property damage/consequential damage to the product or damage
to the environment.
Notes are also used to provide important additional information.
Safety notes in handling indications
Safety notes may relate to certain individual handling indications. Such safety notes
are incorporated into the handling indication as to not interrupt the flow of reading
when carrying out the action. The signal words described above are used.
Example:
1. Loosen screws.
2. Connect lead.
CAUTION
Risk of leads being trapped by the cover!
> Watch the position of the lead. Close cover carefully.
3. Tighten screws.
Special safety notes
To draw attention to special risks, the following symbols are used in the safety notes:
Warning sign
This symbol highlights useful tips and recommendations and
information for efficient and problem-free operation.
Other markings
The following markings are used in these installation and maintenance instructions
to highlight action instructions, results, lists, references and other elements:
1.>, 2.>, 3.>

•
[push button]
The product is an electronic door fitting for use in hotels, hospitals and other build-
ings with frequent changes of room occupant.
The operator must equip the relevant doors with a profile cylinder for emergency
opening in the event of faults or emergencies.
Type of risk
Warning of dangerous electrical voltage
Warning of a hazardous area
Step-by-step action instructions
Results of action steps
Lists without a defined order
Controls (e.g. push buttons, switches), display
elements (e.g. signal lamps)