KERN KFS-TM Notice D'utilisation Et D'installation page 98

7.5 Weighing with tare
 Deposit weighing vessel. After successful standstill control press the
Zero display and the indicator [] next to
container is now internally saved.
 Weigh the material, the net weight will be indicated.
 After removing the weighing container, the weight of the weighing container
appears as negative display.
 The tare procedure can be repeated as many times as necessary, for example
with initial weighing of several components for a mix (add-on weighing). The limit
is reached when the total weighing range capacity is full.
 To delete the tare value, remove load from weighing plate and press
7.5.1 Pre-Tare
There is also the possibility to enter a known tare value via the numeric keypad.
 Enter the tare value and acknowledge by
Deleting the Pre-Tare value:
Unload the weighing plate and press
22
TARE appear. The weight of the
.
, the balance changes to the zero display.
KFS-TM-BA_IA-def-2321
button.
.