KERN KFS-TM Notice D'utilisation Et D'installation page 129

F8 UA
RS-232 mode
F9 bl.
Baud rate
F10 PA
Parity
F11 50
F12 AC
F13 bk
Display background illumination
KFS-TM-BA_IA-def-2321
4 UA0
Output via RS232C interface disabled
4 UA1*
Continuous data output
4 UA2
Continuous data output of stable weighing values
One output for stable weighing value. No output
4 UA3
for stable weighing values. Renewed output after
stabilization.
For remote commands,
4 UA4
Issue after pressing the PRINT ´button
Standard printer setting, output after pressing the
4 UA5
PRINT button
id on/off
dt on/off
G on/off
n on/off
C on/off
PCS on(off)
UW on/off
t on/off
4 UA6
Select TP-UP Printer or LP-50 Printer
4 UA7 KCP on/off
41 bl 0
1200 bps
41 bl1
2400 bps
41 bl 2
4800 bps
41 bl 3
9600 bps
42 Pr0*
No parity bit
42 Pr1
Odd parity
42 Pr2
Even parity
Sd0 on*
Autom. printout enabled on zero display
Sd0 of
Autom. printout disabled on zero display
For automatic totalizing see chap. 7.7.2
5 AC 0
With this function the individual weighing values
are automatically added into the summation
memory when the balance is unloaded and
edited, when an optional printer is connected.
Manual totalizing, see chap. 7.7.1
5 AC 1*
With this function the individual weighing values
are added into the summation memory by
pressing
printer is connected.
5 bkL0
Background illumination off
Automatic background illumination on when
5 bkL1
weighing pate is loaded or key pressed.
5 bkL2
Continuous background lighting
see chap. 9.2.
Printout memory on/off
Printout date on/off
Printout gross weight on/off
Printout net weight on/off
Printout total on/off
Printout parts counting on/off
Printout weighing unit on/off
Tara value printout
and edited, when an optional
53