KERN KFS-TM Notice D'utilisation Et D'installation page 107

7.7.2 Automatic adding-up
With this function the individual weighing values are automatically added into the
summation memory when the balance is unloaded and edited, when an optional
printer is connected.
Menu settings:
„F12 AC"  „5 AC 0", see chap. 8
„F8 UA"  „4 UA 5" see chap. 8
Add up:
 Calculate the average item weight (see chap. 7.6.1) or enter it manually
(see chap. 7.6.2).
 Place weighing goods A. After the standstill control sounds a signal tone,
the weighing value will be added into the summation memory.
 Remove the weighed good. When an optional printer is connected, data
will be edited.
More weighed goods can only be added when the display ≤ zero.
 Place goods to be weighed B.
After the standstill control sounds a signal tone, the weighing value will be added
into the summation memory.
Remove the weighed good.
The total weight, the number of weighings as well as the total number of pieces will
shortly appear (Indicator [] next to
When an optional printer is connected, data will be edited.
KFS-TM-BA_IA-def-2321
).
TOTAL
31