KERN KFS-TM Notice D'utilisation Et D'installation page 132

F8 bl.
Baud rate
F9 PA
Parity
F10 S0
F11 AC
F12 bk
Display background illumination
F13 ti
Date and clock time/
screen saver
F14 tA
Restricted taring range
SAmPLE
Counting system
Factory settings are marked by *.
56
41 bl 0
1200 bps
41 bl1
2400 bps
41 bl 2
4800 bps
41 bl 3
9600 bps
42 Pr0*
No parity bit
42 Pr1
Odd parity
42 Pr2
Even parity
Sd0 on*
Autom. printout enabled on zero display
Sd0 of
Autom. printout disabled on zero display
For automatic totalizing see chap. 7.7.2
5 AC 0
With this function the individual weighing values
are automatically added into the summation
memory when the balance is unloaded and
edited, when an optional printer is connected.
Manual totalizing, see chap. 7.7.1
5 AC 1*
With this function the individual weighing values
are added into the summation memory by
pressing
printer is connected.
5 bkL0
Background illumination off
Automatic background illumination on when
5 bkL1
weighing pate is loaded or key pressed.
5 bkL2
Continuous background lighting
Screen saver ON
SLP on
Setting date and clock time
D m y
dd mm yyyy
(TT MM JJJJ)
Y m d
yyyy mm dd
(JJJJ MM TT)
SLP off
Screen saver OFF
Press
the navigation buttons to select the desired
setting, the active decimal place is flashing.
Confirm input by
Counting system settings
rS232
Connection to reference balance EWJ
Counting only at the IFS
SCALE
and edited, when an optional
SEt YE - year
SEt dA – month and day
Set ti - clock time
SEt YE - year
SEt dA – month and day
Set ti - clock time
, the current setting is displayed. Use
.
KFS-TM-BA_IA-def-2321