IKA C-MAG HS 7 control Mode D'emploi page 51

All manuals and user guides at all-guides.com
Error codes
/// Troubleshooting correctly
The stirrer displays an error code; following is an overview
of possible errors and solutions.
Proceed as follows in such cases:
› Turn off the device by using the power button.
› Carry out corrective measures.
› Restart the device.
Error code | Causes | Effect | Solutions
Err. 1 – Watchdog error 1
Causes
Effect
Solutions
Err. 2 – Watchdog error 2
Causes
Effect
Solutions
› PC does not transmit any data within
the set watchdog time
› connection to PC interrupted
› heating switched off
› motor switched off
› change watchdog time
› transmit data from PC within set
watchdog time (OUT_WDx@m)
› check cable and plug
› PC does not transmit any data within
the set watchdog time
› connection to PC interrupted
› heating switched off
› motor switched off
› change watchdog time
› transmit data from PC within set
watchdog time (OUT_WDx@m)
› check cable and plug
Error codes 51