IKA C-MAG HS 7 control Mode D'emploi page 23

All manuals and user guides at all-guides.com
Connecting an external thermometer
Press the power button (A) to the right.
1.
Connect the safety contact thermometer compliant with
2.
DIN 12878 Class 2 or temperature sensor PT 1000
(individual sensor) to the connection (M).
Press the power button (A) to the left.
3.
Temperature sensor PT 1000
› The actual temperature (07) shown on the display (H)
corresponds to the temperature of the medium.
The symbol (13) is shown on the display.
Contact thermometer ETS-D5 / ETS-D6
› Follow the instructions for the contact thermometer.
The actual temperature (07) is shown on the display (H).
The symbol (14) is shown on the display.
Menu
Press the "Menu" key (E) for to enter the menu mode.
1.
Set the menu items by turning the rotating knob (D) and
2.
confirm by pushing it.
Press the "Menu" key (E) to enter the menu only possible
3.
if stirring and heating is switched off.
Press the "Menu" key (E) to exit the menu from each state
4.
of the Settings menu.
Start-up 23