General Characteristics - Cembre CS-SD Notice D'utilisation Et D'entretien

- Not to be used near live d.c conductor rail.
- Only to be used by authorised personnel.
- Not to be used for any purpose other than for the support of the
Cembre NR.. impact wrenches or SD.. sleeper drilling machines.
- Do not exceed walking pace when pushing the trolley.
- Do not ride on the trolley.
- The user shall not modify the design or confi guration of the trolley.
- Cannot be used over switches and crossing.

1. GENERAL CHARACTERISTICS

TROLLEY TYPE:
Application range:
Track gauges:
Max. space dimensions:
Weight without 3rd wheel bar
Weight of 3rd wheel bar
Type of wheel:
Resistance between rail and wheel:
Max. operating angle
The trolley in all the possible confi gurations fulfi ls the requirements defi ned at § 5.15 "Stability"
of the Norm EN 13977:2005 + A1:2007.
3
SUPPORT TROLLEY
WARNING
CS-SD
suitable for the support of Cembre portable machines (SD...
sleeper drills and NR... impact wrenches) during operation.
standard
1435 mm (4 ft 8.5 in.)
kg (lbs):
kg (lbs): 12 (26.4)
CS-SD-TA
900 to 1700 mm
Ref. page 30 and 31
17,5 (38.5)
14 (30.8)
braked
≥1 Mega Ohm
± 5°
ENGLISH