General Characteristics - Cembre TC085 Notice D'utilisation Et Entretien

1. GENERAL CHARACTERISTICS

– Application range: suitable for cutting copper, aluminium or telephone cables having a max ø
– Max operating pressure: .............................................................................................700 bar
– Oil necessary (displacement): ....................................................................................71 cm
– Dimensions: length .......................................................................................................409 mm (16.1 in.)
width .........................................................................................................135 mm (5.3 in.)
– Weight: ................................................................................................................................4,9 kg
2. INSTRUCTIONS FOR USE
2.1) Setting
(Ref. to Fig. 3)
The head is equipped with a "self-lock" quick male coupler suitable for connection to a hydraulic,
pneumatic or electric pump from the Cembre range.
Insert the cable between the blades, up to the desired cutting point. For a running cable, release
the latch (26) and open the tool head.
Fully retract the lower blade (10) before attempting to open the tool head.
With the cable on the lower blade (10), close the tool head and fully secure the latch (26).
Before commencing the cutting operation ensure that the latch (26) is fully secured: partial
closure may damage the head.
2.2) Blade advancement
Operate the pump to advance the lower blade.
Make sure the blades are exactly positioned on the desired cutting point; otherwise retract the
lower blade, as § 2.4 and re-position the cutting head.
2.3) Cutting
Continue operating the pump to close the blades and progressively cut the cable.
The head is designed for cutting copper, aluminium and telephone cables: do not attempt to
cut steel ropes or steel reinforced cables (ACSR).
2.4) Blade opening
To open the blades, fully discharge the oil pressure from the pump.
3
HYDRAULIC CUTTING HEAD
of ....................................................................................................85 mm
TC085
ENGLISH
(3-3/8" in.)
(10,000 psi)
3
(4.3 cu. in)
(10.8 lbs)