Hunter X-CORE XC601i-E Manuel Du Propriétaire page 21

PROGRAMMING THE CONTROLLER
Selecting Specific Days of the Week to Water
1. With the cursor on a specific day
(the cursor will always start with
MO), press the button to activate
a particular day of the week to water.
Press the button to cancel watering
for that day. After pressing a button
the cursor automatically advances to
the next day.
2. Repeat step 1 until all desired days have been selected.
The selected days will show a to indicate their status is ON.
The last is the last day of watering for that program.
Selecting Odd or Even Days to Water
This feature uses numbered day(s) of the month for watering instead
of specific days of the week (odd days: 1st, 3rd, 5th, etc.; even days: 2nd,
4th, 6th, etc.).
1. With the cursor on SUN press the
Odd will flash on the screen.
2. If even day watering is desired, press the
EVEN will flash on the screen. You can move back and forth from
ODD to EVEN by pressing the
3. Once odd or even is chosen, turn the dial back to the RUN TIMES
position to set watering days.
NOTE: The 31st of any month and February 29th are
always "off" days if Odd watering is selected.
Mo Tu Tu We Mo We Th Th Fr Fr Sa Sa Su Su
button once.
button once.
button.
Selecting Interval Watering
With this option you can select interval
watering from 1 to 31 days.
1. With the cursor on EVEN, press the
button once and the
appear and a 1 flashing in the display.
Interval watering schedule appears on
the display.
2. Press the or button to select the number of days between
watering days (from 1 to 31 days). This is called the interval.
The controller will water the selected program at the next start time and
will then water at the interval programmed.
icon will
Mo Tu Tu We Mo We Th Th Fr Fr Sa Sa
Even
2, 4,...30
Su Su
19