Publicité
Les langues disponibles
Les langues disponibles
ADVANCED FEATURES
Easy Retrieve™ Program Memory
The X-Core
®
is capable of saving the preferred watering program into
memory for retrieval at a later time. This feature allows for a quick
way of resetting the controller to the original programmed watering
schedule.
To save the program into the memory
1. With the dial in the RUN position, press and hold the
buttons for 5 seconds. The display will scroll three segments
from left to right across the display indicating the program is being
saved into memory.
2. Release the
and
buttons.
To retrieve a program that was previously saved into memory.
1. With the dial in the RUN position, press and hold the
buttons for 5 seconds. The display will scroll three segments
from right to left across the display indicating the program is being
saved into memory.
2. Release the
and
buttons.
24
Programmable Delay Between Stations
This feature allows the user to insert a delay between stations
between when one station turns off and the next one turns on.
1. Start with the dial in the RUN position.
2. Press and hold the
RUN TIMES position.
and
3. Release the
time for all stations in seconds, which will be flashing.
4. Press the
between 0 and 4 hours.
5. Return the dial to the RUN position.
Clearing the Controller's Memory/Resetting
and
the Controller
If you feel you have misprogrammed the controller, there is a process
that will reset the memory to the factory defaults and erase all
programs and data that have been entered into the controller.
1. Press and hold the
2. While holding the
then release the RESET button while continuing to hold the
button.
3. Continue holding
8 seconds).
button down while turning the dial to the
button. At this point the display will show a delay
or
buttons to increase or decrease the delay time
button.
button press the RESET button for 3 seconds,
button until time is displayed (this takes about
Publicité
