Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
Using the appliance
Switching on
•
Plug the appliance into an easily accessible, earthed mains outlet. The
power indicator comes on. The control panel lights up.
•
When the door is opened, the interior light in the refrigerator compartment
comes on.
Before plugging the appliance into the mains socket for the first time, leave it to stand for two
hours if it has been transported in the upright position, or 24 hours if it has been transported
horizontally: this allows the refrigerant gas to flow back into the compressor. Failure to do so
could damage the compressor.
Description of the control panel
When the cooling system is switched on for the first time, all the icons on the display panel
turn on for two seconds.
Fonctions
Setting the temperature
To set the temperature, press
2 and 8 °C). The indicator lamp for the selected temperature will light up.
The selection cycle is as follows:
When the cooling system is switched on for the first time, all the icons on the display panel
turn on for two seconds and the advised temperature of 4°C is selected by default.
Mode selection
Two modes are available in addition to the temperature settings. Press the
activate the desired mode.
button repeatedly until you reach the desired setting (between
14
EN
button to
Publicité
