Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
8.
Place the lower door on a smooth surface with its panel upwards. Loose screw
part
, then Install them to the left side and tighten securely.
9.
Change screw hole covers on middle cover plate from left to right (as shown in figure below).
10. Lay the refrigerator on soft foam packaging or similar material. Remove both adjustable
bottom feet parts, and the lower hinge part by unscrewing the special flange self-tapping
screws.
Stop block
Self-tapping screw
Screw hole covers
Screw hole covers
Lower hinge part (right)
Adjustable bottom feet part
Self-tapping screws
11
EN
and
Publicité
