VALBERG CNF 255 E X180C Consignes D'utilisation page 14

B
Product usage
11. Replace the lower hinge part to the left side and fixing it with the special flange self-
tapping screws. Replace the adjustable bottom feet parts to another side and fixing it.
12. Transfer the lower door to the property position, adjust the lower hinge part, make the
hinge axis into the lower hole of the lower door, then tight the bolts.
13. Upturn the middle hinge part the direction 180 degree, adjust its position, change the
washer on the axis to the lower side, make the middle hinge axis into the upper hole of
the lower door, tight the bolts.
14. Transfer the upper door to the appropriate position. Secure the door's level, make the
middle hinge axis into the lower hole of the upper door.
Middle hinge part
Selftapping screws
12 EN