Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
6.
Place the upper door on a smooth surface with its panel upwards. Place the upper door
on a smooth surface with its panel upwards. Loose screw
them to the left side and tighten securely.
7.
Unscrew the two special flange self-tapping screws which are used for fixing the middle
hinge part, then remove the middle hinge part that hold the lower door in place.
Note: When removing the door, watch for washer(s) between the lower hinge and
the bottom of the lower door that may stick to the door. Do not lose.
Stop block
Self-tapping screw
10
EN
and part
, then Install
Publicité
