Transport Lock; Changing The Attachments - SilverCrest SRRK 3.7 A1 Mode D'emploi

6.2 Transport lock

If the transport lock is activated, the battery symbol 14 flashes
green when the on/off switch 13 is pressed.
• Press and hold the on/off switch 13 for approx. 4 seconds,
in order to switch the transport lock on/off.
• Connecting the plug-in power unit 15 deactivates the trans-
port lock, which cannot be activated during mains opera-
tion.

6.3 Changing the attachments

WARNING! Risk of injury!
Switch off the shaver 12, before you attach or remove the at-
tachments.
1. Figure A: slide the protective cap 16 onto the shaving at-
tachment 9 from below, with the opening first.
2. Figure B: remove the attachment 4, 6 or 9 from the shav-
er 12.
3. Figure B: insert the guide of the attachments 4, 6 or 9 into
the recess of the motor unit for attachments 11, and press
the attachment onto the shaver 12 until it audibly clicks firm-
ly into place.
13
GB