7. Cleaning and care
DANGER! Risk of electric shock!
The hand-held part must be disconnected from the power ca-
ble before it is cleaned under running water.
WARNING! Risk of injury!
Always switch off the device before cleaning it.
WARNING! Risk of material damage!
The blade unit 8 of the shaving attachment 9 can be
cleaned using water. Do not use any other liquids.
Do not use any astringent or abrasive cleaning agents.
NOTE: clean the device after every use.
7.1 Shaver
•
Wipe down the housing of the shaver 12 with a damp
cloth.
7.2 Shaving attachment / blade unit
Dry cleaning of the shaving attachment
1. Clean the 3 shaving heads 8 after each shave using the
cleaning brush 20.
2. Press the release button 10 on the shaving attachment 9, so
that the blade unit 8 opens.
3. Carefully tap the blade unit 8 to empty it.
4. Remove the hair remnants by using the cleaning brush 20.
19
GB