Operation; Before Switching On For The First Time; Transport Lock - SilverCrest SRR 3.7 B1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. Operation

6.1 Before switching on for the first time

CAUTION:
After unpacking, there could still be oil residues on the shav-
ing heads 4 of the shaving attachment 5. Remove these with
an absorbent, lint-free cloth before using the device for the
first time.
Regardless of the charging state of the battery, the rotary shaver
can always be used in mains operation.
1. Before switching to mains operation, ensure that the device
is switched off.
2. Connect the power unit 19 to the connection 14 at the de-
vice.
3. Insert the power unit 19 into a readily accessible wall sock-
et whose voltage matches the voltage stated on the rating
plate.
4. Figure A: push the protective cap 15 downwards off the
shaving attachment 5.
5. Switch on the device with the on/off switch 9.

6.2 Transport lock

If the transport lock is activated, the lock symbol 12 flashes.
Press and hold the on/off switch 9 for approx. 4 seconds, in
order to switch the transport lock on/off.
Connecting the power unit 19 deactivates the transport lock,
which cannot be activated during mains operation.
92
GB

Publicité

Table des Matières
loading

Table des Matières