Operation; Before Switching On For The First Time - SilverCrest SRRK 3.7 A1 Mode D'emploi

6. Operation

6.1 Before switching on for the first time

CAUTION:
After unpacking, there could still be oil residues on the shav-
ing heads 8 of the shaving attachment 9. Remove these with
an absorbent, lint-free cloth before using the device for the
first time.
Regardless of the charging state of the battery, the rotary shaver 12
can always be used in mains operation.
1. Before switching to mains operation, ensure that the device
is switched off.
2. Insert the small plug of the plug-in power unit 15 into the
connecting socket 7 of the rotary shaver.
3. Plug the plug-in power unit 15 in into an easily accessible
wall socket, the voltage of which corresponds to the rating
plate.
4. Figure A: push the protective cap 16 downwards off the
shaving attachment 9.
5. Switch on the device with the on/off switch 13.
12
GB