Gorenje IT64ASC Notice D'utilisation page 21

MOUNTING THE BUILT-IN COOKING HOB
Caution!
• To avoid any hazard, the appliance may be installed by qualified personnel only.
• Panels and furniture lining of the kitchen cabinet receiving the hob must be treated with temperature resistant
adhesives 100° C (otherwise they might be discoloured or deformed because of inadequate temperature
resistance).
• The cooking hob is intended for building into the worktop above the kitchen cabinet of ≥600 mm depth.
After the installation of the built-in hob, make sure that there is free access to the two fixing elements at the front.
• Suspended kitchen cabinets above the cooking hob must be installed at such distance to provide enough room
for comfortable working process.
• The distance between the worktop and the hood must be at least such as indicated in the instructions for
installation of the kitchen hood; in any case, it may not be less than 700 mm.
• The use of hard wood decorative borders around the worktop behind the appliance is allowed, if the minimum
distance remains as indicated in the installation illustrations.
• Minimum distance between the built-in cooking hob and rear wall is indicated in the illustration for the installation
of the built-in cooking hob.
Built-in induction hob
opening dimensions
Installing the foam
gasket
All manuals and user guides at all-guides.com
A 580mm
B 510mm
C 560mm
D 490mm
E 53mm
F 10mm
G 50mm
H 5mm
• Induction hob may be built into 25 to 40 mm thick worktops.
• Bottom kitchen cabinet may not have a drawer. It must be fitted with a
horizontal plate 20 mm away from the worktop bottom surface. Space between
the plate and the hob must be empty and no objects may be stored or kept
there.
• Rear side of the kitchen cabinet must also have a 50 mm high opening along
the entire width of the cabinet, and the front part must have an opening of no
less than 5 mm.
• Incorporation of the oven under the induction hob is permissible for ovens
equipped with a cooling fan.
Prior to inserting the oven, it is necessary to remove the rear kitchen cabinet
panel in the area of the oven opening.
Equally, the front part of the cabinet must have an opening of no less than 5 mm.
Before inserting the appliance into the opening in the kitchen worktop, the
supplied foam gasket must be attached to the lower side of the glass ceramic
(glass) cooking hob.
Do not install the appliance without the foam gasket!
21