Burkert 8026 Démarrage Rapide page 34

11. MAINTENANCE AND
TROUBLESHOOTING
11.1. Safety instructions
DANGER
Risk of injury due to high pressure in the installation.
• Stop the circulation of fluid and release the pressure in the pipes
before detaching the device from the pipe.
Risk of injury due to electrical discharge.
• Shut down and isolate the electrical power source before carrying
out work on the system.
• Observe all applicable accident protection and safety regulations
for electrical equipment.
Risk of injury due to high temperatures of the fluid
• Use safety gloves to handle the device.
• Stop the circulation of fluid and purge the pipe before loosening
the pipes and connections.
• Keep all easily flammable fabrics and fluids away from the device.
Do not insulate the device.
Risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and safety
relating to the use of aggressive fluids.
28
All manuals and user guides at all-guides.com
english
Type 8026 - 8036 - 8076
Maintenance and troubleshooting
WARNING
Risk of injury due to non-conforming maintenance.
• Maintenance must only be carried out by qualified and skilled staff
with the appropriate tools.
• Guarantee a set or controlled restarting of the process, after a
power supply interruption.
11.2. Cleaning of the transmitter
The transmitter can be cleaned with water or using a detergent
compatible with the materials it is made of.
Please feel free to contact your Bürkert supplier for any additional
information.