Burkert 8026 Démarrage Rapide page 23

Type 8026 - 8036 - 8076
Commissioning
Load 1
white
blue
black
Power
1st 4-20 mA
supply
entry
Fig. 8.14 Connection of the 2 transistor outputs and the 2 current outputs, in
NPN/sink mode ("NPN/sink" software programming, see § 10.5)
Load 1
white
blue
black
Power
1st 4-20 mA
supply
entry
Fig. 8.15 Connection of the 2 transistor outputs and the 2 current outputs, in
PNP/source mode ("PNP/source" software programming, see § 10.5)
All manuals and user guides at all-guides.com
Load 2
grey
brown
white
black
brown
2nd 4-20 mA
entry
Load 2
grey
white
brown
blue
black
2nd 4-20 mA
entry
9. COMMISSIONING
9.1. Safety instructions
WARNING
Danger due to non-conforming commissioning.
Non conforming commissioning could lead to injuries and damage
the device and its surroundings.
• Before commissioning, make sure that the staff in charge have
read and fully understood the contents of the manual.
• In particular, observe the safety recommendations and intended
use.
• The device/installation must only be commissioned by suitably
trained staff.
Protect this device against electromagnetic interfer-
ence, ultraviolet rays and, when installed outdoors, the
effects of the climatic conditions.
english 19