Burkert 8026 Démarrage Rapide page 16

Type 8026 - 8036 - 8076
Installation and wiring
8.2.1. Recommendations on installing an
8026 or an 8036 on a pipe
CAUTION
Risk of damage when installing the fitting.
• Respect the installation instructions given in the user manual for
the fitting.
→
Install the fitting on the pipe, respecting the instructions given in
the manual for the fitting used.
→
Respect the following additional conditions of installation to
ensure that the device operates correctly (Fig. 8.1 and 8.2).
- Install the device in such a way that the paddle-wheel axis is
horizontal.
- Prevent the formation of air bubbles in the pipe in the section
around the sensor.
- Ensure that the pipe is always filled in the section around the
sensor.
Fig. 8.1 The paddle-wheel axis must be horizontal
All manuals and user guides at all-guides.com
Fig. 8.2 Air bubbles in the pipes / filling the pipes
In cor rect
Correct
Correct
In cor rect
Fluid circulation direction
Correct
english
In cor rect
13