Sygonix 1644465 Notice D'emploi page 30

e) "LANGUAGE" submenu
This is where you can set the language for the OSD menu.
f) "RESET" submenu
To reset all settings to the factory default settings, select this submenu and then confirm your selection.
g) "SAVE-EXIT" submenu
Once you have adjusted the OSD menu settings, you can save them here. The OSD menu is then automati-
cally exited.
h) "EXIT" submenu
To exit the OSD menu, select this submenu; then confirm your selection.
If you exit OSD menu via "EXIT" (and not by "SAVE-EXIT", see section g), your previous settings
will be used. In the event of interruption in the voltage/power supply to the surveillance camera,
however, the settings will be lost.
30