Sygonix 1644465 Notice D'emploi page 26

8. Select OSD menu
As a special feature, the surveillance camera supports the UTC function (UTC = "up the coax"). This means
that the OSD menu can be conveniently accessed directly via the DVR in order to adjust the settings.
Both accessing the OSD menu from the surveillance camera as well as the transfer of the settings from the
DVR back to the surveillance camera is done directly through the coaxial cable that connects the surveillance
camera and the DVR.
If you use a DVR that does not support the UTC function, you must use an external OSD controller
plugged in between the surveillance camera and DVR.
There surveillance camera itself does not offer the option of accessing the OSD menu or adjusting
the settings in the OSD menu. This is only possible via a corresponding DVR or a suitable OSD
controller.
How to access the OSD menu on your DVR (or via an external OSD controller) is described in the correspond-
ing user manual. Generally, the function can be found under "PTZ" on the DVR menu.
26