Sygonix 1644465 Notice D'emploi page 27

9. Description of the OSD menu
a) "AE" (automatic exposure) submenu
In this menu, you can adjust the exposure depending on the ambient brightness and the ambient conditions at
the site the surveillance camera is installed. Several modes are available to ensure that an optimal picture can
be obtained even when there is backlighting.
"BRIGHTNESS": Adjusts the image brightness
"EXPOSURE MODE": Select exposure mode (the following are available: "GLOBE" = automatic setting,
"CENTRE" = exposure calculated based on the brightness in the centre of the picture, "BLC" = manual setting
if there is backlighting, "FLC" = manual setting if there is upward lighting)
"GAIN": Gain factor for the exposure
"RETURN" = exit submenu and return to the previous menu
b) "WB" (white balance) submenu
Here you can select automatic or manual white balance.
"ATW": Automatic white balance
"MWB": Manual white balance (in "RGAIN" the red component can be adjusted and in "BGAIN" the blue)
"RETURN" = exit submenu and return to the previous menu
27