Publicité
All manuals and user guides at all-guides.com
Notes on completing the model
Before building the model it is important that you study the plan and read the instructions right
•
through to the end.
Tools can be dangerous; please be aware of the hazards involved in using them.
•
Use cable of adequate cross-section, capable of carrying the currents which will flow when the
•
model is flying.
Deploy the receiver aerial as far away as possible from high-current cables (at least 3 cm).
•
Before making any glued joints, be sure to clean the surfaces and remove all traces of grease. We
•
recommend sanding lightly, or wiping with a non-greasy cleaning agent. The same applies to
surfaces to be painted, otherwise the paint is unlikely to adhere well. Before gluing parts to the
fuselage it is essential to roughen the surfaces with fine abrasive paper and de-grease them with
acetone or similar solvent, otherwise you will not obtain strong, durable joints. This applies in
particular to moulded GRP fuselages.
Additional items required
Motor and accessories
Motor
Order No.
OS MAX FS 91 SURPASS II
1926
OS MAX FS 91 SURPASS II-
P
1894
OS MAX FS 120 SURPASS
III
1886
OS MAX FS 120 SURPASS-
E
1848
OS MAX 120 AX
2703
Radio control system
For this model you require at least a six-function RC system with nine servos. The transmitter
should also feature a servo reverse facility.
We particularly recommend mc-22 to mc-24 computer systems. The model is designed for standard-
size servos.
We recommend the following receiver battery: 4N-2200 GMVIS JR, Order No. 98814.4JR, which
should be properly maintained before and after each flying session. Please remember that the pack
needs to be cycled (charged and discharged) several times before it reaches full rated capacity.
For connecting the aileron, flap and retract servos to the receiver you will need five suppressor filters,
Order No. 1040, or one folding ferrite ring, Order No. 98516.1, together with five extension leads,
Order No. 3935.11.
The two aileron servo leads should be extended using extension leads, Order No. 3935.32, and the
two flap servo leads with extension leads, Order No. 3935.11.
Foam padding for the receiver and receiver battery are included in the kit.
The model is suitable for standard-size servos.
Adhesives
Fast-setting epoxy resin, e.g. UHU plus schnellfest, Order No. 962
Slow-setting epoxy resin, e.g. UHU plus endfest, Order No. 950
White glue, e.g. UHU coll, Order No. 958.60
UHU hart cellulose cement, e.g. Order No. 534
UHU ALLESKLEBER Kraft, Order No. 1096
Cyano-acrylate glue ("cyano"), e.g. Order No. 5821
Thread-lock fluid, e.g. Order No. 952
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler
Capacity
Silencer
cc
Order No.
1821.33
14.95
14.95
1821.33
19.96
1886.33
19.96
1886.33
2703.33
20.0
44
Propeller
Order No.
34 x 20 cm
1316.34.20
34 x 20 cm
1316.34.20
36 x 18 cm
1316.36.18
36 x 18 cm
1316.36.18
38 x 25 cm
1318.38.25
02/2007
Publicité
