Chef'sChoice Edgecraft E120 Mode D'emploi page 2

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions.
2. To protect against electrical hazards, do not immerse the
EdgeCraft® in water or other liquid.
3. Make sure only clean knife blades are inserted in the EdgeCraft®.
4. Unplug from outlet when not in use, before putting on or taking
off parts and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner.
U.S. customers: You may return your sharpener to The Legacy
Companies' factory for service where the cost of repair or
electrical or mechanical adjustment can be estimated. When the
electrical cord on this appliance is damaged, it must be replaced
by the EdgeCraft distributor or other qualified service to avoid
the danger of electrical shock.
Outside U.S.: Please return your sharpener to your local distributor
where the cost of repair or electrical or mechanical adjustment
can be estimated. If the supply cord of this appliance is
damaged, it must be replaced by a repair facility appointed by
the manufacturer because special tools are required. Please
consult your EdgeCraft distributor.
7. CAUTION! This appliance may be fitted with a polarized plug
(one blade is wider than the other). To reduce the risk of electric
shock, this plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not modify the plug in
any way.
8. The use of attachments not recommended or sold by The
Legacy Companies may cause fire, electric shock or injury.
English — 2