Hunter X-CORE Manuel De L'utilisateur page 23

PROGRAMMING THE CONTROLLER
Programmable Rain Off
This feature permits the user to stop all
programmed waterings for a designated period
from 1 to 7 days. At the end of the programmed
rain off period, the controller will resume
normal automatic operation.
1. Turn the dial to the SYSTEM OFF
position. Wait for OFF to be displayed.
2. Press the button as many times as
needed to set the number of days off
(up to 7 days).
3. Turn the dial back to the RUN position at
which OFF, a number, the
will be displayed.
The days off remaining will decrease at
midnight each day. When it goes to zero,
the display will show normal time of day
and normal irrigation will resume at the
next scheduled start time.
Seasonal Adjustment
Seasonal Adjustment is used to make global run time changes
without reprogramming the entire
controller. To use the Seasonal Adjustment
feature:
1. Turn the dial to the SEASONAL
ADJUSTMENT position.
2. The display will now show a flashing
number followed by a %, as well as the
bar graph which always remains on the
display. Press the or
All manuals and user guides at all-guides.com
SYSTEM OFF
and icons
SEASONAL ADJUSTMENT
button to
adjust the percentage of the seasonal adjustment. Each bar on the
graph represents 10%. This feature can adjust the controller from
10% to 150% of the original program.
To view the adjusted run times, simply turn the dial to the RUN
TIMES position, the displayed run time will be updated accordingly
as the seasonal adjustment is made.
The controlle should always be initially
NOTE:
programmed in the 100% position.
When using a Hunter "Clik" weather sensor, the Seasonal
RUN
Adjustment value can be adjusted as described.
When using the Solar Sync ET sensor, the Seasonal Adjustment
value is automatically updated daily based on the Solar Sync sensor.
The Solar Sync ET sensor measures weather patterns, determines
the optimal Seasonal Adjustment value, and then updates the
controller on a daily basis. This value can be overridden manually by
pressing the or
value. However, it is important to understand that the manually
adjusted Seasonal Adjustment value will be replaced at midnight
by the new updated value from the Solar Sync sensor.
To revert to a manually adjusted mode, the Solar Sync sensor must
be uninstalled. See page 14 for instructions on how to uninstall the
Solar Sync sensor.
Manually Run a Single Station
buttons to the desired Seasonal Adjustment
1
EN
23